Currently there is a 1/4" npt fitting with a nipple.
What I'd like to do is replace that rubber hose section and the short hard line with -06an size hose and fittings.
The hard line passes through the driver side engine bay/wheel well and routes under and along the body for about three feet. That hard line then stops and is connected via a small rubber hose to the remainder of the hardline that routes back to the fuel tank.
So for the moment it looks like what I'd need are the following components:
- 1/4" npt to -06an male fitting(for "IN" side of mechanical fuel pump)
- 5/16 to -06an male hardline adapter
- three feet of SS hose with both ends having -06an female connectors.
