I completed the driver side headlight harness today. It is installed and has been tested in the garage. The voltage checks are good, so I will be keeping the harness installed to test and make sure there are no issues. I did put the original harness in the trunk in case there is a problem.
 |
The 3 wire flat connector that I am using appears to be the same brand/company. The colors match from the installed mod to the headlight harness that I created.
|
 |
The yellow and green wires from the high beam lamp to the low beam lamp will be about 1" longer on the next wiring harness I build.
|
 |
Once this harness tests as good, I will wrap the wiring with tessa tap to keep the wires protected and it will look better.
|
