3 sep 2026 - Electric Headlight conversion kit

Removed the wiring harness and actuators to test on the work bench.  I used an ATX power supply that I converted to a bench power supply.  I connected the red wire from the harness to +12 and connected the black wire from the harness to ground on the power supply.  The blue wire is the trigger or coil control.  I connected one actuator to the passenger side connector of the wiring harness, then I touched the blue wire to +12.  The actuator worked like it should.  Moved the actuator to the driver side connector of the wiring harness.  Placed the blue wire to +12 and the actuator worked.  Then I did the same process with the other actuator and it worked.  All components of the kit are functional.