- Connected alternator wiring to starter soleniod
- connected ignition, battery + wiring to starter solenoid
- connected battery ground cable to engine block
- installed ignition coil and connected + and - terminals
- installed heater hose to water pump
- installed thermostat housing bypass hose
- installed MSD 6A ignition module and wiring
ToDo:
- install radiator and connect upper and lower radiator hoses
- connect transmission cooler lines to lower radiator
- install electric oil pressure sensor and mechanical oil pressure fittings
- connect wiring to electric oil pressure sensor
- check vacuum modulator hard line for proper fit, connect rubber hose from vacuum modulator hard line to intake manifold
- install intake manifold vacuum accessory manifold
- install power brake booster vacuum hard line to intake manifold
- install windshield wiper manual pump pedal and hoses
- install mechanical engine coolant temperature sensor to intake manifold
- check transmission cooler hard lines for interference...
- install water pump pulley
- install v-belt for water pump-crank shaft-alternator...
