I thought I had properly tightened all of the brake line fittings. Today I discovered the driver side front brake line fitting(the one the is at the flex line) is leaking. I tried a couple things but its still leaking. Decided to go ahead and create a replacement hard line. I have to check the flex line to make sure it is not damaged due to the tightening of the fitting.
I decided to see if the driver side front wheel hard line could still be used. I loosened the fitting at the frame in the front driver side wheel well, re-positioned the hard line then re-installed the fitting. So far there have been no signs of fluid loss at this fitting anymore, will check again in the morning.
