Purchased a used Edelbrock 1405 carb. Its a 600 cfm, vac secondaries w/manual choke.
So far it doesnt look too bad. It has been sitting for quite some time. Floats, float valves, secondary jets, idle mixture screws need to be replaced. There will probably be more parts to replace but thats it for the moment.
Currently the secondary jets, float valve housings are soaking in oil.
Baseline information of a stock 1405 edelbrock carb
Metering Jets
Primary .100
Secondary .095
Metering Rods
.070 x .047
Step-Up Spring
orange (5" Hg)
 |
| That number is the part number which is: 1405 0113 |
 |
| That looks like a accelerator pump assembly, I'll check with the manual - but it needs replacing. No numbers on it, but its blue |
 |
| That is a primary or secondary jet, that looks to be in bad shape. Hopefully I can remove it without causing damage. |
 |
| Thats a primary or secondary jet, that needs to be removed |
 |
| Primary mettering rod, part number looks like 7047 |
 |
| Primary metering rod, that looks like number 7047 |
 |
| This is the lower part(fuel bowl, venturies) There are numbers on each of the venturies and they are removable. |
 |
| This is the lower part(fuel bowl) and this is the part number |
 |
| This is top part of the air horn, this number is on the underside |
 |
| Carb seperatedm primary and secondary jets soaking |
