- Installed wheel bearings and seals for both drum hub assemblies
- Installed driver and passenger side drum hub assemblies and torqued to specs(20 ft-lb)
Didn't have time for anything else today.
Todo:
- install driver and passenger side tie rod assemblies
- install idler arm
- install coil springs
- install wheel/tires
- on the driver side, tighten lower control arm eccentric eliminator bolt
- install wheels/tires
- lower vehicle - all four wheels on the ground
- install brake power booster/master cylinder assembly
- install front driver side and front passenger side brake flex hoses
Here are some pics of the suspension components;
 |
| Driver side adjustable strut rod |
 |
| Testing a possible fix for the seal problem with the roller idler arm. Ended up using a high density closed cell foam seal. |
 |
| Passenger side suspension - tie rod assembly is next piece of hardware to be installed |
